Bodyguard End Seal

Recommended for use with the Bodyguard^®
range of sidings, trim and mouldings.

Designed for the treatment of end cuts, notches and nail holes on Bodyguard^®
treated timber, to protect and seal the wood. Using an end cut sealer during
product installation is an important requirement of the Bodyguard^® 30 Year Limited
Warranty. Use of this product will also minimise moisture uptake into the wood substrate. Bodyguard^® End Seal is tinted white.

INSTRUCTIONS FOR USE: Bodyguard^® End Seal is an easy to use wood sealer, for use with Bodyguard^® exterior siding, trim and moulding products. For the re-sealing of treated timber where cuts, notches, nail and drill holes have exposed fresh timber surfaces. Bodyguard^® treated timber is for above ground use only.

1. Stir or shake thoroughly before and occasionally during use.
2. Do not thin the product.
3. Tin. Apply uniformly by brush or roller, ensuring all freshly exposed timber is well covered.
   Spray can. Hold the can 6-8” away from the surface to be sprayed.
4. Tin. We recommend 2 coats applied by brushing into the grain of the timber.
   Allow several minutes for the first coat to penetrate before applying the second coat.
   Spray can. We recommend 3 spray passes on each area. If cutting pieces in advance, we recommend
   block stacking and spraying end sections together. This will minimize over spray and wastage.
5. Replace lid immediately after use.
6. Can be painted over when thoroughly dry.
7. After application Bodyguard^® End Seal will seep into the wood and dry to a white/transparent colour.

COVERAGE: When applied as recommended above:
Tin. 1 quart should cover approximately 370 end sections of 1x8.
Spray can. At 3 spray passes, 1 can will cover approximately 90 end sections of 1x8.
CLEAN UP: Clean up as required using mineral spirits.
STORAGE & DISPOSAL: Store in a secure, well ventilated area, away from extreme temperatures
and possible ignition sources. Do not incinerate. Dispose of in trash, or offer for recycling if available.
CAUTION: Flammable. Do not use near flame or other sources of ignition.
Use only in well ventilated areas and avoid contact with eyes and prolonged
contact with skin. Wash hands after use.

Find a reseller »